Technical Characteristics:
- Non-irritating formulation
- Contains special hydraulic binders, graded aggregates, polymers, water repellent admixtures, organic molecules, and pigments
- Features innovative BioBlock® and DropEffect® technologies
- Water-repellent and droplet-effect properties
- Uniform color without efflorescence
- UV and weather-resistant colors
- Quick setting and easy to clean
- Smooth, compact surface with low water absorbency
- Shrinkage-compensated for crack-free application
- Excellent resistance to abrasion, compression, and flexural strength
- Good resistance to acids with pH > 3
Application Procedure:
- Joint Preparation: Ensure joints are clean, dust-free, and empty to 2/3 of tile thickness
- Mixing: Blend 20-26% clean water with Ultracolor Plus powder
- Application: Fill joints using a MAPEI grout float or rubber squeegee
- Finishing: Clean excess grout when mix becomes opaque (15-30 minutes) using a damp sponge
- Final Cleaning: Remove powdery film with a clean, dry cloth after grout has hardened
Set to Light Foot Traffic: Floors are ready for light foot traffic after approximately 3 hours.
DOWNLOAD TECHNICAL DATA SHEET
Ready for Use:
- General surfaces: 24 hours
- Swimming pools and basins: 48 hours
Cleaning: Clean tools and containers with water while Ultracolor Plus is still fresh.
Consumption: Varies based on joint width, tile size, and thickness. Refer to consumption table in technical data sheet.
Packaging: 4×5 kg or 8×2 kg alupack boxes, depending on color.
Colors: Available in 34 colors from the MAPEI range.
Storage: 24 months in original packaging in a dry place.
Safety Instructions:
- Not classified as hazardous
- Contains special hydraulic binders that may cause slight irritation
- Wear protective gloves and goggles during application
- Refer to Safety Data Sheet for complete information
Technical Data:
- Mixing ratio: 20-26% water by weight
- Pot life: 20-25 minutes
- Application temperature range: +5°C to +35°C
- Grouting time after installation: Varies based on adhesive type and substrate
- Waiting time for finishing: 15-30 minutes
- Set to light foot traffic: Approximately 3 hours
- Ready for use: 24 hours (48 hours for basins and swimming pools)
- Available in 34 colors
