Technical Characteristics:
- Two-component epoxy-resin-based formulation
- Excellent resistance to acids and chemicals
- Easy cleanability and hygienic properties
- Smooth final surface with low water absorption
- High mechanical strength and durability
- No shrinkage, crack-free application
- Uniform colors resistant to UV and weathering
- Classified as Emicode EC1 Plus (very low emission of volatile organic compounds)
Application Procedure:
- Joint Preparation: Ensure joints are dry, clean, and free of dust
- Mixing: Pour hardener (component B) into component A and mix thoroughly
- Application: Spread with a rubber float, ensuring joints are completely filled
- Finishing: Clean immediately with water and an abrasive pad, then finish with a sponge
- Final Cleaning: Use UltraCare Kerapoxy Cleaner for best results
Set to Light Foot Traffic: Floors are set to light foot traffic after 24 hours at +20°C.
DOWNLOAD TECHNICAL DATA SHEET
Ready for Use:
- General surfaces: 4 days
- Swimming pools and basins: 10 days
Cleaning: Clean tools with water before Kerapoxy hardens. Use Pulicol 2000 for hardened product removal.
Consumption: Varies based on joint width and tile size. Refer to consumption table in technical data sheet.
Packaging: Available in pre-measured units of 10 kg, 5 kg, and 2 kg total weight.
Colors: Offered in 17 colors from the MAPEI Coloured Grouts range.
Storage: 24 months in original packaging in a dry place. Store component A at minimum +10°C.
Safety Instructions:
- Wear protective gloves and goggles
- Follow instructions in the Safety Data Sheet
- For professional use only
Technical Data:
- Mix ratio: Component A : Component B = 9 : 1
- Pot life: 45 minutes at +23°C and 50% R.H.
- Application temperature range: +12°C to +30°C
- Open time as adhesive: 30 minutes
- Set to light foot traffic: 24 hours
- Full cure: 4 days (10 days for swimming pools)
- Available in 17 colors
