Technical Characteristics:
- Composed of cement, fine-graded aggregates, special polymers, additives, and pigments
- Features DropEffect® technology for enhanced water-repellent properties
- Classified as Emicode EC1 Plus (very low emission of volatile organic compounds)
- Water-repellent and easy to clean
- Excellent compressive and flexural strength
- Resistant to freeze/thaw cycles
- Smooth final surface with low water absorption
- High abrasion resistance
- Low shrinkage for crack-free application
- Resistant to acids with pH >3
Recommendations:
- Don’t mix with cement or other products
- Avoid adding water to setting mixtures
- Use between +5°C and +35°C
- Don’t sprinkle dry powder onto grouted surfaces
- Use flexible MAPEI sealants for expansion joints
- Test cleanability on rough or micro-porous surfaces
- For saline electrolysis pools, use Ultracolor Plus or Kerapoxy
DOWNLOAD TECHNICAL DATA SHEET
Application Procedure:
- Prepare joints: Clean and ensure proper depth
- Mix grout: Combine with 23-30% clean water or Fugolastic
- Apply: Fill joints completely using MAPEI float or rubber squeegee
- Finish: Clean excess with damp sponge when mixture becomes matt
- Final cleaning: Remove residue with clean, dry cloth
Set to Light Foot Traffic: Floors are set for light foot traffic after approximately 24 hours.
Ready for Use:
- Floors: After 3 days
- Swimming pools and tanks: After 7 days
Cleaning: Clean tools and containers with water before Keracolor FF hardens.
Consumption: Varies based on joint width, tile size, and thickness. Refer to consumption table in technical data sheet.
Packaging: 25 kg bags and boxes containing 4×5 kg alupacks, depending on color.
Colors: Available in 20 colors from the MAPEI range.
Storage: 12 months for 25 kg bags, 24 months for 5 kg bags in original packaging in a dry place.
Safety Instructions: Refer to the latest version of the Safety Data Sheet available on MAPEI’s website.
Technical Data:
- Mixing ratio: 23-30 parts water per 100 parts Keracolor FF
- Pot life: Approximately 2 hours
- Application temperature range: +5°C to +35°C
- Grouting time after installation: Varies based on adhesive type and substrate
- Set to light foot traffic: 24 hours
- Fully cured: 3 days (7 days for tanks and swimming pools)
- Available in 20 colors
